Fast(?) Internet - ADSL/Cable Modems
- Many times we here lately about the promise of "fast Internet" in Israel.
- Fast Internet, today, includes a lot of hype, and 2 major types of
connections: cable modems and ADSL.
- In each case, we first install an Ethernet card on our system, and place
some device at our house, that connects our tiny home LAN to the network
of the communications provider.
- Since these networks are intended to be very large, they use dynamic IP
address allocation - usually using the DHCP protocol.
- Prediction: "Fast Internet" would turn out to be much smaller, once these
services are supplied to the wide public, and ISPs international bandwidth
will be exhausted.
Cable Modems
- A cable modem is more like a small gateway, that connects to an Ethernet
LAN on one side, and to the cable t.v. data socket on the other side.
- These devices (at least those used by Nonstop) are very slow to start up,
but after they have finished their setup process, can supply a bandwidth
of up to 400K bytes(!) per second.
- A cable t.v. network normally has plenty of available bandwidth in the
down connection (from the network to the end-user) but very little
bandwidth the other way around (from the end-user to the network). This
implies that this network is good for consumers, but not good for running
servers.
- Connecting to nonstop's network (the one I'm familiar with) requires the
usage of a regular Ethernet card and a CROSSED Ethernet cable
connected directly into the cable modem.
- IP address allocation is done using DHCP, and is easily achieved using
the 'pump' command.
- Connections down to nonstop's site are extremely fast. Connections to
the international Internet are much much slower (12K bytes - 16K bytes
per second, on a test conducted 2 month ago).
ADSL
- ADSL (Asymmetric Digital Subscriber Line) connections are done using ADSL
modems, over regular phone lines.
- ADSL modems supply a bandwidth of 1.5M bps (or sometimes more) in the down
direction, and 128K bps (or sometimes more) in the up direction. The exact
speed changes with the distance between the end-user and Bezeq's local
communications exchange.
- The actual Internet service is provided by Israeli ISPs, not by Bezeq,
which dictates a very strange setup.
- In order to have the connection working, there is a need to first install
an Ethernet controller in the computer, and connect it to the ADSL modem.
- Software-wise, there is a need to run a PPP connection over the LAN, to
Bezeq's network, and run it over a PPTP (Point-to-Point Tunneling
Protocol) connection. This means - not trivial!
- There is a mini 'Bezeq ADSL hookup HOWTO' document floating around,
originally. written by Dani Arbel. Look at
http://plasma-gate.weizmann.ac.il/Linux/maillists/00/08/msg00502.html
for one of its drafts.